Radwag Scales of WPT series User Manual

User Manual Single load cell platform scales Manual number: ITKU-18-02-01-12-A • Scales of WPT series • Table scales of WPT/F series • Water

WPT/F…/C/K series – main dimensions WPT/F…/C/R series – main dimensions 4.2. Waterproof scales of WPT/H series WPT…H1 series (pil

WPT…H1series (pillar 7cm) –main dimensions WPT…H2 - WPT…H6 series – main dimensionS - 11 -

4.3. Waterproof scales of WPT/HR series WPT…HR2 - WPT…HR6 series – main dimensions 4.4. Scales of WPT series WPT…C1/K series – main

WPT…C1/R series - main dimensions WPT…C1 series – main dimensions - 13 -

WPT…C2/K series – main dimensions WPT…C2/R series – main dimensions - 14 -

WPT…C2 series – main dimensions WPT…C3/K series – main dimensions - 15 -

WPT…C3 series – main dimensions 5. UNPACKING AND ASSEMBLY 5.1. Table scales of WPT/F series Unpack and put the scale on a flat even stabl

5.2. Scales of WPT series Unpack and put the scale on a flat even stable surface far away from sources of heat and then: - Remove transport

5.3. Waterproof scales of WPT/H, WPT/HR series Unpack and put the scale on a flat even stable surface far away from sources of heat and then:

• Turn the pillar and mount it to the platform. The surplus cable place inside the pillar. • Pick up the pan and remove the transport pr

- 2 - JANUARY 2012

7. KEYPAD 8. KEYS’ FUNCTIONS Switching on/off Function key (operation mode selection) Sending a weighing result to RS232 Zeroing Tarring

9. INSCRIPTIONS ON THE DISPLAY No Text string Description 1. FIL Filter level 2. bAud Transmission baud rate 3. PCS Piece counting 4. HiLo +

- 22 - 10. USER MENU 10.1. Submenus User’s menu is divided into 6 basic submenus. Each group has its own characteristic name preceded by the lette

10.2. Browsing user menu Use scale’s keys to move inside the menu. 10.2.1. Keypad + Entering main menu + Inscribing tare value Increasing a

11. WEIGHING Put a load you want to weigh on the weighing pan. When the pictogram appears it means that the result is stable and ready to read. In

11.1. Tarring In order to determine the net mass put the packaging on the pan. After stabilising press - (Net pictogram will be displayed in the l

• Using and set the tare value, • Press , • Program returns to weighings mode. The inscribed tare value can be seen on the display with „–” sig

11.5. Selection of basic weight unit This function is used to set weight unit the scale will start with. Procedure: • Enter the submenu <P

• After you select the unit press , the scale returns to: • Return to weighing according to chapter - 10.2.2. Notice: After turning on the sc

Options: A. When [kg] is a basic unit, users can select following units: [kg, lb, N], [lb] is not accessible for verified scales. B. When [g] is

- 3 - TABLE OF CONTENTS 1. NTENDED USE ...

Notice: Filtering level influences the time of stabilization. The higher the filtering level is the longer stabilization time is needed. Return to w

12.3. Autozero function The autozero function has been implemented in order to assure precise indications. This function controls and corrects „0” i

12.4. Tare function This parameters enables users to configure a tare function. Procedure: • Enter the submenu <P1.rEAd> and then: tArA

13. RS 232 PARAMETERS External devices connected to RS 232C have to be supplied from the same mains and common electric shock protection. It preven

Pr_n noStAb - immediate printout (not accessible in verified scales) Pr_n StAb - sending stable results Pr_n rEPL - automatic operation Pr_n CntA

Return to weighing: see 10.2.2. 13.3. Baud rate Procedure: • Enter the submenu <P2.Prnt> and then: - 35 -

Return to weighing: see 10.2.2. 13.4. Serial transmission parameters Procedure: • Enter the submenu <P2.Prnt> and then: 7d2SnP - 7 da

14. OTHER PARAMETERS The user can set parameters which influence the scale operation. They are gathered in the submenu <P5.othr> e.g. backlig

Return to weighing: See 10.2.2. Notice: When bl=Auto, and the indication has not changed for 10s, the backlight is automatically switched off. The

14.2. “Beep” signal – after pressing a key Procedure: • Enter the submenu <P5.othr> and then: bEEP no - switched off bEEP YES - s

- 4 - 15. WORK MODES ...

* automatic enabling/disabling according to the source of power. Procedure: • Enter the submenu <P5.othr> and then: Returnto weighing: Se

Procedure: After displaying the level of batteries (in per cents) the program returns to weighing. 14.4.2. Battery discharge pictogram The sym

• Message <nImh> appears on the display (for indicators in plastic casings) or <SLA> (for indicators in metal housings). • In case of

Procedure: 1. Supply the indicator from mains. 2. Charge batteries for 12 hours (time of charging 2200mAh batteries). 3. After 12 hours unplug fro

no – mode is disabled YES – mode is enabled Return to weighing: See 10.2.2. 15.2. Selecting quantity of operation modes This function enab

15.3. Counting pieces of the same mass Standard solution is equipped with option of counting small pieces of the same mass. It is possible to execut

• If option <LASt> is choosen in the scale program displays estimated unit mass of the last piece (about 3 seconds) and then goes to Counting p

Notice: 1. If a user presses the key when load is not present on the pan, the message -Lo- will be indicated for a few seconds and the scale will

• The inscribed value confirm by pressing , the program will automatically go to the higher threshold of weighing (Max): • The inscribed valu

Return to weighing: • Press the key twice. 15.5. Control of % deviation referring to the inscribed standard mass Scale software enables control

- 5 - 1. INTENDED USE Scales are designed for fast and precise measurements of weighed loads masses and direct commercial settlements. Tarring in fu

Return to weighing: • Press the key twice. 15.5.2. Mass of standard inscribed to scale memory Procedure: • Enter to <PrcB> function:

Return to weighing: • Press the key twice. 15.6. Automatic tare This function is useful for fast net mass determination of weighed load in cas

15.7. Measurement max force on the pan – latch Procedure: • Enter to <toP> function: • Confirmation of choice of <toP> function is

15.8.1. Enabling the work mode Procedure: • Enter to <Add> function: • A letter „P” in the left side of the display is a confirmation tha

• Take off the load from the pan, indication returns to ZERO and the letter „P” in the left part of the display appears, • Put the next load on

- In order to continue the procedure press , the indication returns to ZERO and the letter „P” appears in the left part of the display. The scale

15.9. Weighing animals Procedure: • Enter to <AnLS> function: • The <tinnE> message appears on the display for 1s, and then the prog

• Load an animal to the platform, • After exceeding the -LO- value (see 13.2), program starts the weighings process. The appearance of subsequent

• The program goes to displaying the first value from the selection of tare values <tArE 0> (press to chose different values): • Aft

Return to weighing: • Press . 15.10.2. Selecting a tare value from the memory • Enter <tArE> function according to the ch. 16.10.1 of

2. PRECAUTIONS 2.1. Maintenance A. Please, read carefully this user manual before and use the device according to its intended use. B. Devices

16. USER CALIBRATION Only for non-verified scales Confirmation of high accuracy of weighing requires periodical correcting of calibration factors

• Put a weight of the displayed mass value on the pan and press . The calibration process will start which is signalled by the message: • Afte

16.2. Start mass adjustment If the scale does not require the full calibration process sit is possible to adjust only a new start mass. Procedure:

• Return to weighing performing the procedure of saving parameters. Caution: If the start mass adjustment lasts longer than 15 the <Err8> m

Cable diagrams: Scale – Kafka printer cable diagram for plastic casing Scale – Kafka printer cable diagram for steel housing 18. COOPERAT

Cable diagrams: Scale – computer cable diagram for plastic casing Scale – computer cable diagram for metal housing 19. COMMUNICATION PROTOC

- 66 - 19.2. A set of commands for RS interfaces Commands Description of commands Z Zeroing T Tarring TO Get tare S Send the stable result in basic

- 67 - XX - command name _ - substitutes spaces 19.4. Command’s description 19.4.1. Zeroing Syntax Z CR LF Possible answers: Z_A CR LF Z_

- 68 - TO_TARA CR LF - command executed Frame format: 1 2 3 4 5-6 7-15 16 17 18 19 20 21 T O space stability space tare space unit CR LF

- 69 - SI_I CR LF - command comprehended but cannot be executed at the moment MASS FRAME - mass value in basic unit is returned Frame format: 1

Notice: Some symbols on accumulators identify harmful elements/compounds: Pb = lead, Cd = cadmium, Hg = mercury. 2.2.1. Power supply of weigh

- 70 - 19.4.7. Send the result immediately in current unit Syntax: SUI CR LF Possible answers: SUI_I CR LF - command comprehended but cannot be e

- 71 - Possible answers: C0_I CR LF - command comprehended but cannot be executed C0_A CR LF - command comprehended and executed 19.4.10. Switch o

19.5. Manual printouts / automatic printouts Users can general manual or automatic printouts from the scale. • Manual printouts can be performed

- 73 - 19.6. Continuous transmission The indicator can work in a continuous transmission mode. It can be switched on or off in parameters or using

- 74 - 20. ERROR COMMANDS Err2 - Value beyond the zero range Err3 - Value beyond the tare range Err4 - Calibration mass or start mass beyond the

- 75 - 21. TECHNICAL PARAMETERS 21.1. Scales of WPT series WPT 6 C1 WPT 15 C1 WPT 30 C1 WPT 30 C2 WPT 6 C1/K WPT 15 C1/K WPT 30 C1/K WPT 30 C

- 76 - Notice: /K designation describes a scale with an indicator with the cable, /R signifies a scale with an indicator integrated with the scale p

- 77 - 21.2. Table scales of WPT/F series WPT/F 3C WPT/F 6C WPT/F 15C WPT/F 30C WPT/F 3C/K WPT/F 6C/K WPT/F 15C/K WPT/F 30C/K Scale type: WPT/

- 78 - 21.3. Waterproof scales of WPT/H series WPT 3H1 WPT 6H2 WPT 15H2 WPT 15H3 WPT 30H3 Scale type: WPT 3H1/K WPT 6H2/K WPT 15H2/K WPT 15H3/K WPT

- 79 - WPT 60H5 WPT 150H5 WPT 300H5 WPT 150H6 WPT 300H6 Scale type: WPT 60H5/K WPT 150H5/K WPT 300H5/K WPT 150H6/K WPT 300H6/K Max capacity 60kg 15

• Remove discharged and then insert new batteries into the chamber, according to given polarity (+/-): • Close the lid of the chamber for batte

- 80 - WPT 30/60H3 WPT 60/150H3 WPT 30/60H4 WPT 60/150H4 Scale type: WPT 30/60H3/K WPT 60/150H3/K WPT 30/60H4/K WPT 60/150H4/K Max capacity 30/60kg

- 81 - 21.4. Waterproof scales of WPT/HR series WPT 3HR2 WPT 6HR2 WPT 15HR2 WPT 15HR3 WPT 30HR3 Scale type: WPT 3HR2/K WPT 6HR2/K WPT 15HR2/K

- 82 - WPT 3/6HR2 WPT 6/15HR2 WPT 15/30HR3 WPT 30/60HR3 WPT 60/150HR3 Scale type: WPT 3/6HR2/K WPT 6/15HR2/K WPT 15/30HR3/K WPT 30/60HR3/K WP

- 83 - 22. TROUBLE SHOOTING Problem Cause Solution Discharged batteries. Connect to mains or change batteries Turning on does not work No batteries

- 84 - • RS232 / RS485 converter for PUE C/31 – KR-01, • RS232 / Ethernet converter for PUE C/31 - KR-04, • Stainless steel anti-vibration table -

MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG WAGI ELEKTRONICZNE 26 – 600 Radom, Bracka 28 Street POLAND Tel. +48 48 38 48 800,

3. WARRANTY CONDITIONS A. RADWAG is obliged to repair or change those elements that appears to be faulty because of production and construction re